Static Workbenches

RS heavy-duty workbenches are available at a standard work height of 850mm, or at 950mm. The ideal height for working with vices and engine prep. They can be fitted with adjustable feet or lockable castors, and a choice of hard wearing composite work surfaces.

Workbench dimensions: 1200mm wide, 850mm high, 600mm deep.

Shot Blasting Cabinet

How many times have you had a second-hand machine in and needed to clean it up before it's presentable enough to earn premier space in your showroom? You no doubt realise the secret to a good and lasting finish is in good professional preparation. In-house shot blasting can be your affordable solution to having better quality machines than your competitors. The cabinet is bench top mounting and comes delivered assembled and ready to use. It is designed for use with glass beads or plastic granular mediums. The glass beading can be supplied as required in 5kg tubs.

Parts Washer

Free standing parts washer that works from a fully enclosed electric motor or can be used with compressed air (1/4 BSP inlet). The tank is one piece nonwelded and has removable shelf and parts basket to keep parts out of the solvent during inspection and drying. The built in filter is replaceable and the solvent is delivered via a flexible metal pipe, a unique Turbo feature gives far better results for less effort. The electric motor can be easily serviced avoiding costly replacements as on cheaper units.

Hydraulic Presses

A familiar sight in modern workshops, hydraulic presses are ideal for crank rebuilds, etc. We offer a 30t press complete with gauge that is capable for most jobs. Different models available on request.

Pillar Drills

Pillar drills offer a safe solution for precise drilling or quantity jobs. The three drills we offer have full CE specifications and a proven electric motor for durability and long life. Both models we offer have height adjustable tables, the GDM50 is fitted with an easy turn handle and ratchet. The multi speed belt drive gives a flexibility to handle most types of material, and the rack and pinion type shaft feed and present depth for the most precise work.

Bench Grinders

Bench grinders are needed by even the smallest workshop and are used for a whole host of jobs large and small. All the units on offer have safety guards, tool rests and eye shields. Each unit comes with grinding stones and or wire wheels and replacements either fine or coarse are available as required.

Vices

We can supply cast iron engineer's vices 4" or 6" from stock and can supply up to 8" to order. Each one has a two year breakage guarantee.

Brake Bleeder/Pressure Testing Kit

This essential workshop tool consists of a vacuum unit and re-filler providing quick, clean, one man operation. The re-filler simply attaches to the master cylinder avoiding spillage and dragging more air through when the reservoir becomes empty. Also tests compression, Fuel injector pressure regulators, Emission control recirculation valves (EGR), Vacuum ignition sensors etc. The vacuum unit draws out the old fluid and sucks the fresh fluid through from the master cylinder - complete bleeding and renewal in just minutes! Supplied with Instructions.

Auxiliary Tank

Part No: 44000135

Capacity 1 litre of fluid. On fuel-injected motorcycles a heavy duty valve with two adapters (1/4" and 5/16") are included, plus 740mm length of 3/8" fuel line. Gives you the ability to work on a running engine when the tank has been removed. Also useful for refilling transmission oil on some late model bikes.

Brake Piston Resetting Tool

Part No: 44000115

Perfect for resetting the pistons in brake callipers. Parallel guidance protects the moving parts against damage and tilting. Avoid using tyre levers and large screwdrivers and do it the professional way.

Universal Flywheel Holding Tool

Part No: 44000060

Double sided pins 5mm & 9 mm adjust to hold flywheel, clutch and pulley from rotating. Locking adjusting screw can be adjusted to required diameter.

Oil Filter Cap Wrench

Part No: 45000100

15 pcs. Cap type filter wrenches including 14 wrenches and one adaptor. Designed to grip like sockets, minimising the possibility of crushing filters. Electro-black oxide finish for rust protection. Use with 3/8" or square drive wrenches. Supplied in carry-case.

Folding Crane

Part No: 42030007

Hoisting capacity kg. 1000. Fast folding model provides easy storage and transportation. Heavy duty castors. Weights only 74 kg and is perfect for mobile or workshop use. Steel wheels. Side pump access with removable handle.

Brake Fluid Bleeder

Part No: 45000140

1 litre capacity. Simple one man operation using standard workshop air supply. Quick and easy operation that does not require any specialist reservoir caps. Draws fluid from the bleed nipple enabling either bleeding or full replacement of fluid in the system.

Coil Spring Compressor

Part No. 44000315

Easy to use tool. that solves the problem how to mount and dismount coil springs on motorcycles.

Fork Oil Level Gauge

Part No. 44000330

For checking and adjusting the oil level on all conventional or inverted forks. Adjustable ring will measure oil levels from 0-300mm. Syringe has a capacity of 60ml.

Fork Seal Installation Tool

Part No. 44000375

Designed for easy installation of most fork seals on either conventional or inverted forks. Range from 26 - 45mm.